SAIGA-12.com - E-STORE

Rear Rail Mount Flip-Up Sight, featuring Single Plane, Dual Aperture, and construction of both black oxide carbon steel and black anodized aircraft grade aluminum.

Rear Rail Mount Flip-Up Sight, featuring Dual Aperture and construction of both black oxide carbon steel and black anodized aircraft grade aluminum

Flip Up Rail Mount Front Sight‏ - Aluminum

Recoil Pad for all Factory Saiga Shotguns and Rifles.
Uses original screws to attach to the factory stock replacing the plastic cover.
NOTE: Will not work with factory Skeleton stock.

*NEW* from SAIGA-12.com ONLY * Push button side folding stock for use on the Saiga and AK type rifles or shotguns with stamped receiver. This is a complete kit that includes a stock, a rubber pad, an adapter block, and screws.

Manufactured in USA. Counts as 1 US made, 922R compliant, part.

*NEW* from SAIGA-12.com ONLY * Push button side folding stock for use on the stock Saiga shotguns or rifles with stamped receiver. This is a complete kit that includes a stock, a rubber pad, an adapter block, pistol grip, and screws.

NOTE: *** EASY SWAP! *** ABSOLUTELY NO MODIFICATION TO THE STOCK GUN REQUIRED!

Manufactured in USA. Counts as 2 US made, 922R compliant, parts.

* New Product * Designed especially for Saiga shotguns and rifles, the KickLite stocks are fitted with the exclusive, patent pending recoil reduction system.

NOTE: *** EASY SWAP! *** ABSOLUTELY NO MODIFICATION TO THE STOCK GUN REQUIRED!

Manufactured in USA. Counts as 2 US made, 922R compliant, parts.

Designed especially for Saiga shotguns and rifles. It has the balance and hefty look that the AK needs.

NOTE: *** EASY SWAP! *** ABSOLUTELY NO MODIFICATION TO THE GUN REQUIRED!

Manufactured in USA. Counts as 2 US made, 922R compliant, parts.

• Fits Saiga shotgun and rifles, AK47, AK74, Valmet, Mac-90, Romak-3, PSL, Galil, Vepr and others.
• Easily slides over spring assembly with no spring assembly disassembly required!
• Only .25" thick.
• Estimated life is 5,000 rounds.

Free shipping in lower 48 states!

Recommend if installing an Elevated front sight on your shotgun.

It also can be used as a replacement for a lost sight.

Recomended for shotguns with non-threaded bbl ONLY!
Manufactured In Russia.

Recomended for shotguns with
non-threaded or internally threaded bbl.
Manufactured In Russia.

Saiga-12 12-Round Drum Magazine (black polymer) - 2 3/4 shells only. "Smoke" back cover.

States With Magazine Capacity Restrictions:
CA - 10 Rds, DC - 10 Rds, HI - 10 Rds, IL (Chicago 12 Rds, Aurora 15 Rds), MA - 10 Rds, MD - 20Rds, NY - 10 Rds, NJ - 15 Rds, OH - 30 Rds.

This product will NOT be shipped to billing and/or shipping addresses in the following states/cities:
CA, DC, HI, MA, or NY.

Saiga-12 20-Round Drum Magazine (black polymer) - 2 3/4 shells only. "CLEAR" back cover.

States With Magazine Capacity Restrictions:
CA - 10 Rds, DC - 10 Rds, HI - 10 Rds, IL (Chicago 12 Rds, Aurora 15 Rds), MA - 10 Rds, MD - 20Rds, NY - 10 Rds, NJ - 15 Rds, OH - 30 Rds.

This product will NOT be shipped to billing and/or shipping addresses in the following states/cities:
CA, DC, HI, IL (Chicago & Aurora), MA, NJ, or NY.

Saiga-12 20-Round Drum Magazine (black polymer) - 2 3/4 shells only. "SMOKE" back cover.

States With Magazine Capacity Restrictions:
CA - 10 Rds, DC - 10 Rds, HI - 10 Rds, IL (Chicago 12 Rds, Aurora 15 Rds), MA - 10 Rds, MD - 20Rds, NY - 10 Rds, NJ - 15 Rds, OH - 30 Rds.

This product will NOT be shipped to billing and/or shipping addresses in the following states/cities:
CA, DC, HI, IL (Chicago & Aurora), MA, NJ, or NY.

Saiga-12 20-Round Drum Magazine (black polymer) - 2 3/4 shells only. "BLACK" back cover.

States With Magazine Capacity Restrictions:
CA - 10 Rds, DC - 10 Rds, HI - 10 Rds, IL (Chicago 12 Rds, Aurora 15 Rds), MA - 10 Rds, MD - 20Rds, NY - 10 Rds, NJ - 15 Rds, OH - 30 Rds.

This product will NOT be shipped to billing and/or shipping addresses in the following states/cities:
CA, DC, HI, IL (Chicago & Aurora), MA, NJ, or NY.

Replacement CLEAR cover for MD-20 Drum manufactured by MD Arms, LTD.

Replacement SMOKE cover for MD-20 Drum manufactured by MD Arms, LTD.

Replacement BLACK cover for MD-20 Drum manufactured by MD Arms, LTD.

If you're someone that likes having spare parts, spare springs for MD-20 drums are available to order. for MD-20 Drum manufactured by MD Arms, LTD.

This grip is based off the factory Molot style grip used on the Molot VEPR-12 shotgun.

Counts as 1 us made part in 922r compliance.
Manufactured in USA by MD Arms, LTD.

This trigger guard allows the use of any AK style pistol grip and is one of the finest available anywhere.
Made from heat treated steel giving it the strength of the military grade AK trigger guards. Supplied with both rivets and screws for installation type of your choice. This installation does require two additional holes for mounting using supplied drill bit. Easy to follow instructions for installation are included.

PLEASE NOTE: This trigger guard is designed for a Saiga-12 that has had the trigger group moved forward from the sporting location as imported to the standard AK location and with standard military style grip screw and square grip screw nut installed.

Manufactured in USA by MD Arms, LTD.

100-round dual drum magazine, 5.56mm, for use with AR-15 / M-16 / M-4

Extremely reliable magazine for extended fire power.
Meets military specifications.

States With Magazine Capacity Restrictions:
CA - 10 Rds, DC - 10 Rds, HI - 10 Rds, IL (Chicago 12 Rds, Aurora 15 Rds), MA - 10 Rds, MD - 20Rds, NY - 10 Rds, NJ - 15 Rds, OH - 30 Rds.

This product will NOT be shipped to billing and/or shipping addresses in the following states/cities:
CA, DC, HI, IL (Chicago & Aurora), MA, NJ, NY, or OH.

75-round, rear loading, drum magazine modified specifically for use with Saiga 7.62 x 39 rifles, bullet guide is NOT needed.

To be used in 922r compliant Saiga's only.

States With Magazine Capacity Restrictions:
CA - 10 Rds, DC - 10 Rds, HI - 10 Rds, IL (Chicago 12 Rds, Aurora 15 Rds), MA - 10 Rds, MD - 20Rds, NY - 10 Rds, NJ - 15 Rds, OH - 30 Rds.

This product will NOT be shipped to billing and/or shipping addresses in the following states/cities:
CA, DC, HI, IL (Chicago & Aurora), MA, NJ, NY, or OH.

10-round magazine for the Saiga-12 shotgun by AGP Arms, Inc.
These magazines are manufactured in the US and count as 3 US made parts,
therefore, accordingly marked "USA" on the body, follower, and floorplate.

These are Generation 2 (GEN 2) magazines.

10-round magazine for the Saiga-12 shotgun by AGP Arms, Inc.
Color: Earth Green
These magazines are manufactured in the US and count as 3 US made parts,
therefore, accordingly marked "USA" on the body, follower, and floorplate.

These are Generation 2 (GEN 2) magazines.

Cut your AGP magazine to the lengths YOU want, 8, 6, 4, 2, or, if you really wanted to, even down to 1 round.
This external floorplate is made from glass filled nylon.

2-round magazine for the Saiga-12 shotgun by AGP Arms, Inc.
These magazines are manufactured in the US and count as 3 US made parts,
therefore, accordingly marked "USA" on the body, follower, and floorplate.

These are Generation 2 (GEN 2) magazines.

2-round magazine for the Saiga-12 shotgun by AGP Arms, Inc.
Color: Earth Green
These magazines are manufactured in the US and count as 3 US made parts,
therefore, accordingly marked "USA" on the body, follower, and floorplate.

These are Generation 2 (GEN 2) magazines.

12-round magazine for the Saiga-12 shotgun by SGM Tactical, LLC.
These magazines are manufactured in the US and count as 3 US made, 922R compliant, parts,
therefore, accordingly marked "Made In The USA".

States With Magazine Capacity Restrictions:
CA - 10 Rds, DC - 10 Rds, HI - 10 Rds, IL (Chicago 12 Rds, Aurora 15 Rds), MA - 10 Rds, MD - 20Rds, NY - 10 Rds, NJ - 15 Rds, OH - 30 Rds.

This product will NOT be shipped to billing and/or shipping addresses in the following states/cities:
CA, DC, HI, MA, or NY.

12-round magazine for the Saiga-12 shotgun WITH SGM Tactical MAGAZINE WELL.
It will NOT work with a stock Saiga-12 without the magwell. (The magwell is available for purchase at our store, SKU: SGMT12MW)
These magazines are manufactured in the US and count as 3 US made, 922R compliant, parts,
therefore, accordingly marked "Made In The USA".

States With Magazine Capacity Restrictions:
CA - 10 Rds, DC - 10 Rds, HI - 10 Rds, IL (Chicago 12 Rds, Aurora 15 Rds), MA - 10 Rds, MD - 20Rds, NY - 10 Rds, NJ - 15 Rds, OH - 30 Rds.

This product will NOT be shipped to billing and/or shipping addresses in the following states/cities:
CA, DC, HI, MA, or NY.

12-round magazine for the Saiga-12 shotgun AND SGM Tactical magazine well - Combo Pack.
The magazines are manufactured in the US and count as 3 US made, 922R compliant, parts,
therefore, accordingly marked "Made In The USA".

States With Magazine Capacity Restrictions:
CA - 10 Rds, DC - 10 Rds, HI - 10 Rds, IL (Chicago 12 Rds, Aurora 15 Rds), MA - 10 Rds, MD - 20Rds, NY - 10 Rds, NJ - 15 Rds, OH - 30 Rds.

This product will NOT be shipped to billing and/or shipping addresses in the following states/cities:
CA, DC, HI, MA, or NY.

SGM Tactical Magwell for the Saiga 12 for use with modified Surefire (SGMT) magazines.
You can permanently modify the existing Surefire magazines or purchase the magazines specifically designed for this magwell. (SKU: SF-S1212-COMP)
This kit comes with instructions, drill and tap set, and mounting hardware.
Made of blended polymer for added strength and durability.
Made in the USA.

10-round magazine for the Saiga-12 shotgun by SGM Tactical, LLC.
These magazines are manufactured in the US and count as 3 US made, 922R compliant, parts,
therefore, accordingly marked "Made In The USA".

8-round magazine for the Saiga-12 shotgun by SGM Tactical, LLC.
These magazines are manufactured in the US and count as 3 US made, 922R compliant, parts,
therefore, accordingly marked "Made In The USA".

2-round magazine for the Saiga-12 shotgun by SGM Tactical, LLC.
These magazines are manufactured in the US and count as 3 US made, 922R compliant, parts,
therefore, accordingly marked "Made In The USA".

Saiga .223 30-round Polymer magazine with bolt hold open feature on last round.
Made in USA by SGM Tactical, and counts as 3 US made parts for 922r Compliance Purposes.

States With Magazine Capacity Restrictions:
CA - 10 Rds, DC - 10 Rds, HI - 10 Rds, IL (Chicago 12 Rds, Aurora 15 Rds), MA - 10 Rds, MD - 20Rds, NY - 10 Rds, NJ - 15 Rds, OH - 30 Rds.

This product will NOT be shipped to billing and/or shipping addresses in the following states/cities:
CA, DC, HI, IL (Chicago & Aurora), MA, NJ, or NY.

10-round magazine for the Saiga .410 shotgun by SureFire Gun Mags LLC.
These magazines are manufactured in the US and count as 3 US made, 922R compliant, parts,
therefore, accordingly marked "Made In The USA".

These are Generation 2 (G2) magazines.

15-round magazine for the Saiga .410 shotgun by SureFire Gun Mags LLC.
These magazines are manufactured in the US and count as 3 US made, 922R compliant, parts,
therefore, accordingly marked "Made In The USA".

These are Generation 2 (G2) magazines.

States With Magazine Capacity Restrictions:
CA - 10 Rds, DC - 10 Rds, HI - 10 Rds, IL (Chicago 12 Rds, Aurora 15 Rds), MA - 10 Rds, MD - 20Rds, NY - 10 Rds, NJ - 15 Rds, OH - 30 Rds.

This product will NOT be shipped to billing and/or shipping addresses in the following states/cities:
CA, DC, HI, MA, or NY.

This choke set includes Modified, Full, and Extra Full.
Threads on to existing factory threads.

Great looking & fully adjustable from Xtra-Full to Reverse choke #2,
and all settings in between.

Fits Saiga-12 factory threaded barrel.

Manufactured in USA.

Great looking & fully adjustable from Xtra-Full to Reverse choke #2,
and all settings in between.

Fits Saiga-12 factory threaded barrel.

Manufactured in USA.

Great looking & fully adjustable from Xtra-Full to Reverse choke #2,
and all settings in between.

Fits Saiga-12 factory threaded barrel.

Manufactured in USA.

Great looking & fully adjustable from Xtra-Full to Reverse choke #2,
and all settings in between.

Fits Saiga-12 factory threaded barrel.

Manufactured in USA.

This is the highest quality, most accurate copy of the latest Izhmash style Saiga-12 flash hider available.
This does count as a 922 compliance part.
This part screws on in place of the factory thread protector.Made in the USA, in house by MD Arms, Ltd.

This is the highest quality, most accurate copy of the Izhmash style Saiga-12 flash hider available.
This does count as a 922 compliance part.
This part screws on in place of the factory thread protector.Made in the USA, in house by MD Arms, Ltd.

Muzzle Break for Saiga-12 shotgun.
Threaded for a standard Saiga-12 threaded bbl.
Manufactured In USA.

Like other breacher brakes out there it will definitively do the job of breaching and mild braking. Unlike others it has unique “Talon” claws that will destroy doors or other surfaces but will NOT cut bare skin unless high intentional force is applied.

Manufactured in USA.

Slant Brake designed for the Saiga-12.
Unique Russian inspired design.
Manufactured in USA.

Free shipping in lower 48 states!

Inspired by E-Tac’s own Talon Breacher Brake for Shotgun, this is one of the coolest looking best functioning rifle brakes on the Planet. Besides looking great it works incredibly well with virtually no recoil and a very satisfying deep yet relatively quiet report without concussion.

Manufactured in USA.

V-Plug - Saiga shotgun gas regulator replacement. 4 different medium to high brass settings.

The leader in gas utilization and regulation technology, resulting in freedom of ammo choice and convenience. its an amalgamation of efficiency and automatic "setting free" regulation of the Saiga 12 Gas System.

*** Link to Instructions (PDF) *** & *** Link to Installation & Tuning VIDEO ***

Fits most Saiga shotguns.

NOTE: Does NOT work on Saiga Rifles - there is a separate version that is made specifically for Saiga Rifles.

Made for use with the factory buttstock or SGM Tactical Stock Kit.

Fits most AK-47 rifles and all Saiga rifles.

NOTE: Does NOT work on Saiga Shotguns - there is a separate version that is made specifically for Saiga Shotguns.

Made for use with the factory buttstock or SGM Tactical Stock Kit.

Saiga Tactical Lower Forend with integral, triple picatinny rail.
Fits Saiga-12 models.
Manufactured in USA.

SGM Tactical Quad rails will use all accessories and red dot scopes, not just allen screw fittings.
Designed for installation on Saiga 12 shotgun without gunsmithing. Fits perfect.

• Fits Saiga 7.62X39mm, .223, and Compatible Variants
• Solid Aircraft Aluminum Alloy Construction with Precise CNC Machining
• Easy Installation with NO Modification to the Barrel

Made specifically for Saiga Rifles (7.62, 5.45, .223) Chaos Mini Rail System is manufactured to highest standards in the industry. These MIL-STD-1913 rails are made from aircraft grade 6061 aluminum alloy. Hard coat military specification MIL-A-8625 or Type III non-reflective black. Weight: 11 oz.

• Fits all Stamped Saiga's and AK Receivers!
• Accepts CAR Buffer Tubes, AR stocks, and SGM Tactical Stocks, commercial threaded with 1.168' O.D. thread size.
• Threaded hole is set at 2 degrees downward angle for absolutely perfect shooting position.
• Computer-Aided design and NC machined from a solid block of U.S. Steel with tough black oxide finish.
• No rivet tools required for this conversion trunnion - bolts and tools is included.

This devise is designed to manually lock the bolt in the open position.

Free shipping in lower 48 states!